1801M077 Brown Stove Gas Burner with Tube

Step 1: Unplug the stove from the power source and make sure all the knobs are turned off.

Step 2: Remove the existing burner. Lift up the grate of the stove, unscrew the screws from the burner, pull out the burner and disconnect the wires and tubes connected to it.

Step 3: Insert the new burner into the stove and connect the wires and tubes as they were connected before with the old burner.

Step 4: Secure the burner by screwing it into the stove. Then, put the grate back in place.

Step 5: Plug the stove back into the power source and turn the stove on to test.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.