W11218376 Whirlpool Control Panel

Replacing the Whirlpool W11218376 CONSOLE

1. Unplug your appliance from the electrical outlet and shut off the water supply to the appliance.

2. Remove any objects or debris from the top of the unit.

3. Use a putty knife to remove any remaining adhesive and screws securing the control panel to the console.

4. Carefully remove and set aside the control panel.

5. Using a flathead screwdriver, remove the four screws that secure the console to the washer.

6. Gently pull the old console away from the washer body.

7. Take the new console and lift it into place.

8. Secure the console with the four screws previously removed.

9. Reattach the control panel and secure it with adhesive and screws.

10. Reconnect all wiring according to any diagrams included with the replacement console.

11. Plug in the appliance and turn on the water supply.

12. Test the new console for proper operation.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.