WP74010205 Whirlpool Stove Stainless Burner Control Knob

$12.39

The Range Surface Control Knob allows you to adjust the heating level of your gas cooktop surface burner. Remove the old knob by pulling it straight off its post. This knob is stainless steel. Replacing this part will require no disassembly or repair experience.Part Specification• This product is a Factory Certified Part. These three words […]

1 in stock

SKU: WPL WP74010205
Category:
Brands:

Description

The Range Surface Control Knob allows you to adjust the heating level of your gas cooktop surface burner. Remove the old knob by pulling it straight off its post. This knob is stainless steel. Replacing this part will require no disassembly or repair experience.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Top Burner Knob, Stainless Steel• No tools required for installation

1. Unplug the power cord to the appliance. Make sure the appliance is completely powered off before attempting to replace any part.

2. Use a Phillips head screwdriver to loosen and remove the two screws from the control knob's mounting plate on the front of the appliance.

3. Remove the control knob by pressing in on the tabs located under the knob. Once the knob is loose, straighten out the clip that is attached to the knob and gently pull off the knob.

4. Place the new WP74010205 Whirlpool Control Knob onto the shaft of the position selector. Make sure the arrows on the knob are facing the same direction as the arrows on the selector.

5. Reattach the mounting plate to the appliance with the Phillips head screws.

6. Plug the power cord back in and turn the appliance on to make sure the control knob is working properly.

7. Enjoy your new WP74010205 Whirlpool Control Knob and improved appliance functionality!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.

Additional information

Weight 0.038300 kg
Dimensions 2.76 × 1.26 × 1.54 cm
Part Type

Knob, Dial & Button

Dimension

  • WPL 74010205 (wpl-74010205)
  • WPL 74010205 (wpl-74010205)