154740304 Frigidaire Dishwasher Fold-Down Tine Row Fence

Replacing the 154740304 Frigidaire Dishwasher Fold-Down Tine Row Fence

Replacing the 154740304 Frigidaire Dishwasher Fold-Down Tine Row Fence is a fairly simple procedure that can be completed in a few steps. This step-by-step guide will walk you through the process.

Tools Needed:

• Philips screwdriver

• Flathead screwdriver

• Regular pliers

• Needle nose pliers

Instructions:
1. Unplug the dishwasher before beginning.

2. Locate the old tine row fence. It can be found in the interior of the dishwasher, on the upper-left side.

3. Use a flathead screwdriver to remove the screws holding the tine row fence in place.

4. Carefully remove the old tine row fence.

5. Place the new tine row fence in place.

6. Secure the new tine row fence with the screws and Phillips screwdriver.

7. Use the regular and needle nose pliers to adjust the tines and make sure they will fit correctly in the new tine row fence.

8. Carefully replace the dishwasher’s door and plug it back in.

Your Frigidaire dishwasher should now be equipped with a 154740304 fold-down tine row fence. Enjoy your newly installed tine row fence!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.