W11545329 Whirlpool Fastener

Replacing the Whirlpool W11545329 SCREW

1. First, make sure that the power is shut off to the appliance. Unplug the power cord from the outlet, or switch off the circuit breaker at the main panel.

2. Turn off the water line to the appliance.

3. Gently pull the refrigerator away from the wall.

4. Locate the Whirlpool W11545329 SCREW along the side of the refrigerator and unscrew it from its mounting bracket.

5. Using a screwdriver, remove the old Whirlpool W11545329 SCREW and discard it.

6. Get a new Whirlpool W11545329 SCREW and screw it into the mounting bracket.

7. Plug the power cord back into the outlet or turn the circuit breaker back on.

8. Turn the water line back on.

9. Push the refrigerator back into place along the wall.

10. Test the refrigerator by turning it on, and ensure that its functioning properly.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.