DE67-00213A Samsung Coupler

DIY Instructions for Replacing the DE67-00213A Samsung Coupler

Replacing the DE67-00213A coupler on a Samsung model is one of the easier do-it-yourself repairs that can be done. Follow these simple steps to replace the part quickly and easily:

1. Begin by turning off the power to the appliance by unplugging it or flipping the switch off at the circuit breaker box.

2. Take the appliance apart to access the back panel. Carefully unscrew any screws securing the back panel and use a screwdriver or other tool to gently pry off the panel.

3. Locate the cursed coupler, which is usually found towards the bottom/middle of the rear panel.

4. Unscrew any screws that are holding the old coupler in place.

5. Slide out the old coupler and discard it.

6. Insert the new DE67-00213A coupler into place and secure with screws as needed.

7. Test the new coupler to make sure it is working correctly.

8. Replace the back panel and secure it with the screws.

9. Turn the power back on to the appliance and test it to ensure everything is working correctly.

Congratulations! You have just replaced the DE67-00213A coupler on your Samsung appliance. If you have any difficulty with these instructions, please contact an appliance repair technician for additional support.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.