WB35X29720 GE Oven Door Gasket

How to Replace the Gasket Door Assembly on a GE WB35X29720

If your GE WB35X29720 microwave oven is having trouble keeping out warm air and steam, it might be time to replace the gasket door assembly. The gasket helps keep moisture and heat from escaping the microwave, which helps keep food cooked evenly. Here are step-by-step instructions for how to replace the gasket door assembly.

Tools and Materials Needed:

• Gasket door assembly (GE WB35X29720)

• Phillips screwdriver

• Flathead screwdriver

Instructions:

1. Begin by unplugging the cord of the GE WB35X29720 microwave. This will ensure that you don't get an electric shock while replacing the gasket.

2. Remove the screws from the side trim of the microwave. Use the Phillips screwdriver for this.

3. Carefully remove the side trim by pushing it slightly away from the body of the microwave.

4. Next, use the flathead screwdriver to take out the screws securing the upper front trim.

5. Pull the upper front trim slightly away from the body of the microwave to remove it.

6. Now, you will be able to access the gasket door assembly. Carefully pull it away from the door and set it aside.

7. Take the new gasket door assembly and carefully attach it to the door of the microwave. Make sure it is completely secured before proceeding.

8. Reattach the upper front trim and secure it with screws.

9. Put the side trim back in place and secure it with the Phillips screws.

10. Finally, plug the cord into the wall outlet, and you're finished!

Now your GE WB35X29720 microwave should be ready to use without the worry of steam or heat escaping.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.