DE81-02696A Samsung Oven Range Top Burner Spark Igniter Kit

Replacing the Samsung DE81-02696A SVC-IGNITER ASSY KIT SINGLE

Replacing a Samsung DE81-02696A SVC-IGNITER ASSY KIT SINGLE is a complex process that requires some skill, but it can be completed by a DIYer. Here are step-by-step instructions for safely changing out the assembly:

1. Turn off the power to the appliance. Unplug or remove any power source from the unit before beginning.

2. Disconnect the gas line. Turn off the gas valve and disconnect the gas line from the unit.

3. Remove the damaged assembly. Locate the Samsung DE81-02696A SVC-IGNITER ASSY KIT SINGLE. Use a screwdriver or other tool to carefully remove the screws and brackets that hold the assembly in place. Carefully remove the assembly without damaging any of the components.

4. Install the new Samsung DE81-02696A SVC-IGNITER ASSY KIT SINGLE. Check the instructions that come with the replacement assembly to make sure you understand how it needs to be installed. Assemble the parts, and then use screws and brackets to secure it in place.

5. Reconnect the gas line. After the new Samsung DE81-02696A SVC-IGNITER ASSY KIT SINGLE has been installed, turn the gas valve back on and reconnect the gas line.

6. Restore power and test the unit. Plug anything back into the appliance or restore power to it, and then test that the unit is working properly.

By following these steps, you will be able to safely and easily replace your Samsung DE81-02696A SVC-IGNITER ASSY KIT SINGLE. Always exercise caution when handling electrical and gas lines, and call a professional if needed.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.