DE81-03466A Samsung Burner O-Ring 8 500 BTU

Step-by-Step Guide on How to Replace the Samsung DE81-03466A SVC-BURNER O-RING 8 500 BTU

1. Turn off the gas and unscrew the top of the burners, this will allow you to access the O-ring underneath. Remove the old O-ring by using a flat head screwdriver or small pliers.

2. Measure your new O-ring with a ruler to ensure that it’s the same size as the one you are replacing. It should be 8.3 x 10 mm

3. Put the new O-ring in place and secure it in place with a flat head screwdriver or small pliers.

4. Reattach the burner top, making sure the O-ring is held securely in place.

5. Turn the gas back on and test the burner and O-ring to make sure they are working correctly.

6. Finally, enjoy the improved performance of your Samsung DE81-03466A SVC-BURNER 8 500 BTU!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.