DE81-05392A Samsung Burner Cap Assembly Outer 18k

DIY: How to Replace a Samsung DE81-05392A SVC-CAP BURNER OUTER 18K

Replacing the Samsung DE81-05392A SVC-CAP BURNER OUTER 18K is an important part of maintaining your appliance. This DIY guide will walk you through the steps of replacing this necessary component.

Tools and Materials Needed

• Phillips screwdriver

• Flathead screwdriver

• New Samsung DE81-05392A SVC-CAP BURNER OUTER 18K

Instructions

1. Unplug your appliance from the power supply before beginning any repairs.

2. Use a flathead screwdriver to remove the screws from the back of the appliance that secure the burner outer to the appliance body.

3. Carefully remove the old Samsung DE81-05392A SVC-CAP BURNER OUTER 18K and set aside.

4. Place the new Samsung DE81-05392A SVC-CAP BURNER OUTER 18K into place, making sure to align the holes with the screws on the back of the appliance.

5. Secure the new burner outer in place with the screws from Step 2 and tighten them with a Phillips screwdriver.

6. Plug the appliance back into the power supply and test to make sure the burner functions properly.

7. Once you have confirmed that the burner is working, you’re all finished!

Conclusion

Replacing the Samsung DE81-05392A SVC-CAP BURNER OUTER 18K is a simple process that shouldn’t take more than an hour or two. With the right tools and following the instructions provided in this DIY guide, you should be able to replace your burner outer quickly and easily.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.