DE81-06698A Samsung Dual Burner Gasket

DIY Guide to Replacing the Samsung DE81-06698A SVC-GASKET BURNER DUAL

Replacing the Samsung DE81-06698A SVC-GASKET BURNER DUAL is a straightforward but delicate process that requires the right tools and careful attention. In this DIY guide, you will learn how to properly replace the Samsung DE81-06698A SVC-GASKET BURNER DUAL.

Tools Required:

- Phillips Head Screwdriver

- Flathead Screwdriver
- Wrench Set
- Needle Nose Pliers
- Gloves

Instructions:

1. Unplug the appliance power cord from the wall socket and shut off the gas supply line.

2. Carefully remove the housing assembly by removing all screws with a Phillips head screwdriver.

3. Locate and remove the old Samsung DE81-06698A SVC-GASKET BURNER DUAL by unclipping it from the side of the range.

4. Remove any screws or clips that may be holding the old part in place.

5. Take your new Samsung DE81-06698A SVC-GASKET BURNER DUAL and attach it to the side of the range using the screws or clips that were removed from the old part.

6. Secure all connections with a wrench set and tighten until secure.

7. Test the new Samsung DE81-06698A SVC-GASKET BURNER DUAL before replacing the housing with the Phillips head screwdriver.

8. Reconnect the power and gas lines and turn both on.

9. Test the range to ensure proper functioning of the new Samsung DE81-06698A SVC-GASKET BURNER DUAL before completing the repair.

Congratulations! You have just completed the DIY installation of a new Samsung DE81-06698A SVC-GASKET BURNER DUAL.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.