WPW10290353 Whirlpool Drip Bowl 6″ ClimaTek

DIY Guide for Replacing the Whirlpool WPW10290353 BOWL-DRIP 6" BLK UNIVERSAL

Replacing your Whirlpool WPW10290353 BOWL-DRIP 6" BLK UNIVERSAL can be an easy DIY task if you follow the right steps. This guide will provide you with the information necessary to safely and accurately complete the replacement process.

Step 1: Gather the Tools You Need

Before starting the replacement process, gather all the tools you need to complete the job. These tools may include a screwdriver, adjustable wrench, and pliers.

Step 2: Disconnect Power

In order to safely complete the replacement, you must disconnect any power sources connected to the Whirlpool. For example, if your appliance is connected to an outlet, make sure to unplug it before continuing with the replacement process.

Step 3: Remove the Top Panel

Depending on your model, your top panel may be held on by screws or clipped on. If screws are used, use your screwdriver to remove them before carefully lifting off the top panel. If clips are used, gently pry them off with your pliers.

Step 4: Remove the Old BOWL-DRIP

Once the top panel is removed, you will have access to the BOWL-DRIP. Loosen the mounting screws that hold it in place and pull the old BOWL-DRIP out.

Step 5: Install the New BOWL-DRIP

Place the new BOWL-DRIP into the opening and replace the mounting screws. Make sure that the screws are tightened securely.

Step 6: Replace the Top Panel

To finish the replacement process, replace the top panel. If screws were used, reattach them using your screwdriver. If clips were used, slide them back into place.

Step 7: Reconnect Power Sources

Once the top panel is secured, reconnect any power sources that you disconnected during the first step.

You've successfully replaced your Whirlpool WPW10290353 BOWL-DRIP 6" BLK UNIVERSAL!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.