W11430645 Whirlpool Water Inlet Valve

Replacing the Whirlpool W11430645 VALVE

Step 1: Shut off the power to the washing machine. Unplug it from the wall or turn off the circuit breaker.

Step 2: Remove the hoses that connect to the valve. Disconnect the hoses from the valve, using pliers if necessary.

Step 3: Remove the screws that hold the valve in place. Use a screwdriver to remove the screws and pull out the valve.

Step 4: Insert the new valve. Make sure the alignments on the valve are correct.

Step 5: Install the new screws to secure the valve into place.

Step 6: Reconnect the hoses to the new valve.

Step 7: Turn on the power to the washing machine.

You have now successfully replaced the Whirlpool W11430645 VALVE!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.