WP67003531 Whirlpool Drawer Assembly

Replacing a Whirlpool WP67003531 Drawer-Pa:

1. Shut off power to the dishwasher. You'll need to locate the circuit breaker and turn off the appropriate switch.

2. Open the dishwasher door. Unhook any hoses connected to the drawer-pa.

3. With a screwdriver, remove the screws securing the top of the drawer-pa.

4. Gently lift the drawer-pa out of the dishwasher.

5. Take the new drawer-pa and slide it into place. Replace the screws and attach any hoses that were disconnected.

6. Restore power to the dishwasher.

7. Close the door and run a cycle to test the new drawer-pa.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.