FG IAQ Aerostar Pocket Filter, 24″ x 24″ x 22″, MERV 13, 8 Pockets

FG IAQ Aerostar Pocket Filter, 24" x 24" x 22", MERV 13, 8 Pockets.

The Aerostar Pocket Filters are constructed with a unique spanned stitching, which optimizes pocket configuration for minimum resistance and maximum dust holding capacity, The media consists of strategically layered and blended melt-blown polypropylene fibres fastened to a non-shed, high-density polypropylene backing. This design creates a dual-stage filtration effect with the final layer capturing the smaller particulate from the air stream. A thermoplastic sealant is applied in liquid form allowing it to totally encapsulate each stitch. Safety stitching around all three edges, created a leak free design that will withstand high pressure and turbulent system conditions. Individual pockets are bonded to a galvanized steel j-channel. The j-channels are mechanically fastened to a 26 gauge galvanized steel header.

The Pocket Filter offers high efficiency filtration, low initial resistance, high dust holding capacity, and best economy of any filter within the industry. The non-shed media eliminates fibre migration downstream and withstands 100% humidity.

The Pocket Filters are designed as a primary or secondary filters in heating, ventilating and air conditioning systems. Various depths and pocket configurations are offered to accommodate any type of HBAC equipment. Superior dusting-holding capabilities allow these filters to be used in most commercial and industrial applications as well as hospitals, automative plants, and biotechnology facilities.