King Electric Wall Heater Thermostat, DPST, for KT, KTW, PAW & W Series

King Electric Wall Heater Thermostat, 2 Pole with Positive Stop.

Use with King Wall heaters KT, KTW, PAW and W Series.

Control Range: 45°F to 80°F (7°C – 27°C)
Maximum Amps: 25 Amps
Power Source: 125 VAC 250 VAC 277 VAC
Sensing Element: Snap action switch with fully protected bi-metal sensor.
Shaft 1" Long
UL Recognized
SNAP ACTION SWITCHING: Instant, positive response. No arcing. No burning of contacts to shorten switch life. No TV snow, no radio static.
Enclosed for protection against dirt and corrosion.
BI-METAL SENSING ELEMENT: This sensitive element dependably registers the temperature change. Fully protected.
VENTED FRAME: Top and bottom to maintain normal temperature in outlet box.
AIR PASSAGE: No obstruction of air across bi-metal sensor.
FACTORY SEALED and CALIBRATED: Engineered for accurate, dependable performance. Field adjustment not required.
ENCLOSED TERMINALS: To prevent contact with grounded faces.
RATING: 22 Amps continuous at 125, 240 Volts AC. Non-inductive.
18 Amps continuous at 277 Volts AC. Non-inductive.
AVERAGE DIFFERENTIAL: Approximately 5°F at 50% of rated load.
CYCLE RATE: Approximately 2 – 4 per hour at 50% of rated load.