BrassCraft Universal CSSC55-60 ProCoat Stainless Steel Gas Connector. This part is approximately 60" long x 1/2" ID (5/8" OD) tube with 1/2" FIP x 1/2" FIP fittings.

BrassCraft’s ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available. Ideal for large demand appliances such as 5-burner+ gas ranges, furnaces and smaller BTU residential tankless water heaters. Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures. High tensile strength stainless steel is less susceptible to work hardening. Deep corrugations enhance flexibility and maneuverability of connector during installation. Temperature rating: -40°F to 150°F. Pressure rating: 1/2 psi maximum

Indoor Applications: Range, Dryer, Gas Fireplaces, Gas Logs, Space Heater, Furnace, Wall Heater.
Outdoor Applications: Rooftop Units, Outdoor Dryer, Stationary Outdoor Grills, Gas Fire Pits.

Possible Repair Solution For:
Will not start, no heat, not enough heat, gas smell, leaking gas.

Please Note: This is intended as a guideline only, as other items can cause the same symptoms.

This part is also known as a flexible gas line connector, gas line, gas supply line, dryer gas line, range gas line, oven gas line, stove gas line, cooktop gas line.

The appliance this part fits is also referred to as a stove, oven, cooktop, wall oven, or range oven.

Basket, Upper (3)

Related products

Armstrong Bearing & Cap Assembly, #6

Aube RC840T-347 Electromechanical Relay with Built-In 24V – 347V Transformer, for Radiant Heating Applications

Blower Ball Bearing 3/4″ With Collar, 2/Pack, LRCR

Broan Nutone Range Hood Vent Discharge Collar Damper

Dundas Jafine Flexible Insulated Duct 4″ x 25′ R4.2 Silver Jacket